Видео

What wheels are those?

Thanks so much buddy

5,025 to wach 46 to like ty

Sunroof brotha

Outstanding! Great straightforward video that saved me $215.00 at the garage. Thanks Larry!

You don't have to remove the fender liner or go through the top of the engine bay. The foglights pop out from the front of the bumper. You just pop the little silver trim ring that goes around them off with a flathead as it's just held in with a few pressure clips and then there is one T25 screw that holds the lamp in after you remove that the lamp just comes right out. Replace the bulb, pop it in and screw it in then just replace trim piece and you're done. Takes less than 5 minutes to do both and you don't have to wait for the engine to cool down or scrape your hands up.

Beautiful sound! Do you remember the model of your Vibrant muffler?

@larryfopps how many hours was the total installation?

My AEB with 292tkm got 14 Bar, 14 Bar , 12.5Bar, 14 Bar .... is this good ?

Experiencing the same issue. Driver and passenger side.

How do you change the pull cord mine broke and it has rivets on the cover not bolts

Do you have the link for where you bought this turbo? Highly interested in grabbing one for myself

Do all spark plugs need to be removed when doing a compression test? Nothing in the cylinders at all except the one that is being tested?

Honestly this was so helpful! Thank you so much

Swabs are not good to use. Better is a fluorescent light test or one of those guns. Light and spray is like 50 but the guns are like several thousand? Wouldn’t trust the swabs as they react to pretty much everything acidic.

Perfect to do when installing new lines, Thanks!

I have an Evo-One im installing it was for a Toyota but i flashed it to Ford, i have notfound a harness so i used some soldering and wire taps but i never finished because i wasnt sure if i could use the Ford factory FOB ? Or if i need to purchase the FORTIN FOB, are you using your cars fob or did you buy a Fortin fob? I knoww this is an older post but hoping you still read the input Thank you for the video and the info.

Smart

I tested my yeti rambler and it turned the swab dark red. 🤨

What size 9 blade

Beware the 9 blade turbines have serious problems with blowing the tips off the turbine blades

Can you just leave them there or do you need to soak them and prepare for when rain is coming ?

I m curious, did anyone complain about the loud turbo?

Gawd bless yer, guvnor - that had been bugging me for weeks and you've helped me sort it

Even demons run away hearing it.

I have to repeat this exercise every 2-3 months with mt Q5, never had this problem in any previous cars

I’m having the same issue what did you do to fix it?

thanks for the video,unfortunatley my lenox ac has no Y terminal so it says i cant use the C adapter

Every person in this video is a loser. VW boy, camera man, Honda boy, etc.

Thank You. Got one of these after owner passed and called shops to get it repaired. Local shops claimed they can't get the carb. Word is the china knock-offs work for a minute and are garbage so I ordered this one. I figured if I get a working generator for the price of the carb ($118.) I did good.

Hi , great video. I have a Q5 2013 I have connected the wires as per your guidance . I Can you please help me with the prgramming ?

Nice one, this helped me out!

Oh thaaaank you!!

Thanks for the video. Saved me from going to the shop.

I need your help

Audi wanted to charge me 326.00$ ! Glad I looked this up first

i ave TWO F250 Trucks for magic parts for you in Fla 6K

My very first one hac a plastic cam shaft, the next one had steel with a plastic gear like that one, I'm going to add tannerright (sp?) And shoot it from 300 yards and see what's left... cheers!

Thank you

Very thorough and helpful !

Appreciate the video question for you since you seem to know more than anyone I’ve found on here. 1 how are your head light flickering like that. Two I’m trying to install a led hood light strip I’ve done it on my Nissan but this is way harder one not sure which spot to tap into in the fuse box and two I can’t figure out where to find the turn signal wires?!! Nissan it was right there this is all LED lighting and I can do some stuff but you seem like a mechanic any advice would be extremely helpful!

?

What brand turbo you got?

I know this video is 2 or so years old buy I just found it because I had the same problem with my trimmer. I also couldn't find a cam gear so I filled the inside of the cam gear with JB weld and let it set up for about 5 minutes as I cleaned the shaft to remove any oils and set the timing on the engine. I pushed the cam gear on and gave it 24 hours to set up. It started right up and works like a charm. Just a little hack for those like me who can't afford to buy Stihl products. 🥰

Mine is not coming off

I used to think this sounded cool when I was in middle school, now as an adult and low mileage lbz owner, I’m so glad my truck has 0 mods

This is exactly the same on a Cupra or Seat Leon. Thanks for the video.

The way you say "radiator" has me questioning accents and pronunciations. Where are you from? Canada?

Thanks buddy

Multiple failures for me. 1) My coil went dead. Took a week or two to get a replacement. Worked but 2) Gas lines had oxidized to the point where they had cracks that leak air. Bought new lines and a carb, just in case. 3) When Taking the motor down, the centrifugal clutch came out in pieces so another wait for a replacement part. Ran for an hour then it 4) jumped timing with a gear failure similar to the one in your vid. Another user had a timing belt self destruct. I'm going to go the JB Weld route and see if I can set valve timing good'nuff to get one last season out of it. I've never run it on anything but 50:1 2-stroke fuel hoping that would help keep it lubed enough to keep from grenading, that didn't get it done. It's a shame it wasn't made with better materials and design. Not bad when it is running but keeping it running is a trick.